Wire Size for 165.38 Amps
Typical copper and aluminum wire gauges for 165.38 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
165.38A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 2/0 AWG | 4/0 AWG | 0.7996V (0.6663%) | OK |
| 50 ft | 2/0 AWG | 4/0 AWG | 1.6V (1.33%) | OK |
| 75 ft | 2/0 AWG | 4/0 AWG | 2.4V (2%) | OK |
| 100 ft | 2/0 AWG | 4/0 AWG | 3.2V (2.67%) | OK |
| 125 ft | 3/0 AWG | 4/0 AWG | 3.17V (2.64%) | OK |
| 150 ft | 4/0 AWG | 300 kcmil | 3.02V (2.51%) | OK |
| 175 ft | 4/0 AWG | 350 kcmil | 3.52V (2.93%) | OK |
| 200 ft | 250 kcmil | 500 kcmil | 3.41V (2.84%) | OK |
| 250 ft | 300 kcmil | 500 kcmil | 3.55V (2.96%) | OK |
| 300 ft | 500 kcmil | 750 kcmil | 2.56V (2.13%) | OK |
| 400 ft | 500 kcmil | no aluminum pick | 3.41V (2.84%) | OK |
| 500 ft | 750 kcmil | no aluminum pick | 2.83V (2.36%) | OK |
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.