Wire Size for 200.37 Amps
Typical copper and aluminum wire gauges for 200.37 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
200.37A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 4/0 AWG | 250 kcmil | 0.6091V (0.5076%) | OK |
| 50 ft | 4/0 AWG | 250 kcmil | 1.22V (1.02%) | OK |
| 75 ft | 4/0 AWG | 250 kcmil | 1.83V (1.52%) | OK |
| 100 ft | 4/0 AWG | 250 kcmil | 2.44V (2.03%) | OK |
| 125 ft | 4/0 AWG | 300 kcmil | 3.05V (2.54%) | OK |
| 150 ft | 250 kcmil | 500 kcmil | 3.1V (2.58%) | OK |
| 175 ft | 300 kcmil | 500 kcmil | 3.01V (2.51%) | OK |
| 200 ft | 300 kcmil | 500 kcmil | 3.44V (2.87%) | OK |
| 250 ft | 500 kcmil | 750 kcmil | 2.58V (2.15%) | OK |
| 300 ft | 500 kcmil | 750 kcmil | 3.1V (2.58%) | OK |
| 400 ft | 750 kcmil | no aluminum pick | 2.74V (2.28%) | OK |
| 500 ft | 750 kcmil | no aluminum pick | 3.43V (2.86%) | OK |
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.