Wire Size for 204.08 Amps
Typical copper and aluminum wire gauges for 204.08 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
204.08A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 4/0 AWG | 250 kcmil | 0.6204V (0.517%) | OK |
| 50 ft | 4/0 AWG | 250 kcmil | 1.24V (1.03%) | OK |
| 75 ft | 4/0 AWG | 250 kcmil | 1.86V (1.55%) | OK |
| 100 ft | 4/0 AWG | 250 kcmil | 2.48V (2.07%) | OK |
| 125 ft | 4/0 AWG | 350 kcmil | 3.1V (2.59%) | OK |
| 150 ft | 250 kcmil | 500 kcmil | 3.15V (2.63%) | OK |
| 175 ft | 300 kcmil | 500 kcmil | 3.06V (2.55%) | OK |
| 200 ft | 300 kcmil | 500 kcmil | 3.5V (2.92%) | OK |
| 250 ft | 500 kcmil | 750 kcmil | 2.63V (2.19%) | OK |
| 300 ft | 500 kcmil | 750 kcmil | 3.16V (2.63%) | OK |
| 400 ft | 750 kcmil | no aluminum pick | 2.79V (2.33%) | OK |
| 500 ft | 750 kcmil | no aluminum pick | 3.49V (2.91%) | OK |
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.