Wire Size for 221.49 Amps
Typical copper and aluminum wire gauges for 221.49 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
221.49A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 4/0 AWG | 300 kcmil | 0.6733V (0.5611%) | OK |
| 50 ft | 4/0 AWG | 300 kcmil | 1.35V (1.12%) | OK |
| 75 ft | 4/0 AWG | 300 kcmil | 2.02V (1.68%) | OK |
| 100 ft | 4/0 AWG | 300 kcmil | 2.69V (2.24%) | OK |
| 125 ft | 4/0 AWG | 350 kcmil | 3.37V (2.81%) | OK |
| 150 ft | 250 kcmil | 500 kcmil | 3.42V (2.85%) | OK |
| 175 ft | 300 kcmil | 500 kcmil | 3.33V (2.77%) | OK |
| 200 ft | 350 kcmil | 750 kcmil | 3.25V (2.71%) | OK |
| 250 ft | 500 kcmil | 750 kcmil | 2.86V (2.38%) | OK |
| 300 ft | 500 kcmil | no aluminum pick | 3.43V (2.86%) | OK |
| 400 ft | 750 kcmil | no aluminum pick | 3.03V (2.52%) | OK |
| 500 ft | Exceeds available gauges | |||
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.