Wire Size for 228 Amps
Typical copper and aluminum wire gauges for 228 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
228A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 4/0 AWG | 300 kcmil | 0.6931V (0.5776%) | OK |
| 50 ft | 4/0 AWG | 300 kcmil | 1.39V (1.16%) | OK |
| 75 ft | 4/0 AWG | 300 kcmil | 2.08V (1.73%) | OK |
| 100 ft | 4/0 AWG | 300 kcmil | 2.77V (2.31%) | OK |
| 125 ft | 4/0 AWG | 350 kcmil | 3.47V (2.89%) | OK |
| 150 ft | 250 kcmil | 500 kcmil | 3.52V (2.94%) | OK |
| 175 ft | 300 kcmil | 500 kcmil | 3.42V (2.85%) | OK |
| 200 ft | 350 kcmil | 750 kcmil | 3.35V (2.79%) | OK |
| 250 ft | 500 kcmil | 750 kcmil | 2.94V (2.45%) | OK |
| 300 ft | 500 kcmil | no aluminum pick | 3.53V (2.94%) | OK |
| 400 ft | 750 kcmil | no aluminum pick | 3.12V (2.6%) | OK |
| 500 ft | Exceeds available gauges | |||
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.