Wire Size for 30.33 Amps
Typical copper and aluminum wire gauges for 30.33 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
30.33A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 8 AWG | 8 AWG | 1.18V (0.9832%) | OK |
| 50 ft | 8 AWG | 8 AWG | 2.36V (1.97%) | OK |
| 75 ft | 8 AWG | 6 AWG | 3.54V (2.95%) | OK |
| 100 ft | 6 AWG | 4 AWG | 2.98V (2.48%) | OK |
| 125 ft | 4 AWG | 4 AWG | 2.34V (1.95%) | OK |
| 150 ft | 4 AWG | 3 AWG | 2.8V (2.34%) | OK |
| 175 ft | 4 AWG | 3 AWG | 3.27V (2.72%) | OK |
| 200 ft | 3 AWG | 2 AWG | 2.97V (2.48%) | OK |
| 250 ft | 2 AWG | 1 AWG | 2.94V (2.45%) | OK |
| 300 ft | 2 AWG | 1/0 AWG | 3.53V (2.94%) | OK |
| 400 ft | 1/0 AWG | 2/0 AWG | 2.96V (2.47%) | OK |
| 500 ft | 2/0 AWG | 3/0 AWG | 2.93V (2.44%) | OK |
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.