Wire Size for 433.33 Amps
Typical copper and aluminum wire gauges for 433.33 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
433.33A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 750 kcmil | no aluminum pick | 0.3705V (0.3087%) | OK |
| 50 ft | 750 kcmil | no aluminum pick | 0.741V (0.6175%) | OK |
| 75 ft | 750 kcmil | no aluminum pick | 1.11V (0.9262%) | OK |
| 100 ft | 750 kcmil | no aluminum pick | 1.48V (1.23%) | OK |
| 125 ft | 750 kcmil | no aluminum pick | 1.85V (1.54%) | OK |
| 150 ft | 750 kcmil | no aluminum pick | 2.22V (1.85%) | OK |
| 175 ft | 750 kcmil | no aluminum pick | 2.59V (2.16%) | OK |
| 200 ft | 750 kcmil | no aluminum pick | 2.96V (2.47%) | OK |
| 250 ft | Exceeds available gauges | |||
| 300 ft | Exceeds available gauges | |||
| 400 ft | Exceeds available gauges | |||
| 500 ft | Exceeds available gauges | |||
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.