Wire Size for 470 Amps
Typical copper and aluminum wire gauges for 470 amps across common run lengths on a 120V circuit, sized to keep voltage drop under 3% and respect the NEC 240.4(D) small-conductor rule. Actual install sizing depends on conductor material, insulation/termination temperature rating, cable type, ambient and bundling derates, and local code.
470A Wire Gauge by Distance
| Distance | Copper Gauge | Aluminum Gauge | V-Drop (Cu) | NEC Status |
|---|---|---|---|---|
| 25 ft | 750 kcmil | no aluminum pick | 0.4019V (0.3349%) | OK |
| 50 ft | 750 kcmil | no aluminum pick | 0.8037V (0.6698%) | OK |
| 75 ft | 750 kcmil | no aluminum pick | 1.21V (1%) | OK |
| 100 ft | 750 kcmil | no aluminum pick | 1.61V (1.34%) | OK |
| 125 ft | 750 kcmil | no aluminum pick | 2.01V (1.67%) | OK |
| 150 ft | 750 kcmil | no aluminum pick | 2.41V (2.01%) | OK |
| 175 ft | 750 kcmil | no aluminum pick | 2.81V (2.34%) | OK |
| 200 ft | 750 kcmil | no aluminum pick | 3.21V (2.68%) | OK |
| 250 ft | Exceeds available gauges | |||
| 300 ft | Exceeds available gauges | |||
| 400 ft | Exceeds available gauges | |||
| 500 ft | Exceeds available gauges | |||
Aluminum is not typical for 10 AWG and smaller branch-circuit conductors in residential settings. Copper gauges use the NEC 240.4(D) branch-circuit cap, not raw 75°C ampacity.
Also Calculate
Other Amperages
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.