How Many Amps Is 15 kW at 24V?

15 kilowatts at 24V works out to roughly 624.96 amps on DC at PF 0.85. That is typical for solar arrays, battery banks, and DC industrial equipment. See the DC and alternate-phase numbers below for other circuit types.

15 kW at 24V, DC (PF 0.85)
624.96 Amps
15 kilowatts at 24V on DC ≈ 624.96 amps
AC Single Phase (PF 0.85)735.25 A
624.96

Formulas

DC: kW to Amps

I(A) = 1000 × P(kW) ÷ V(V)

1000 × 15 ÷ 24 = 14,999 ÷ 24 = 624.96 A

AC Single Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (PF × V(V))

14,999 ÷ (0.85 × 24) = 14,999 ÷ 20.4 = 735.25 A

Equipment & Circuit Sizing

Energy Cost

15 kW costs $2.55/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (DC)

How the line current for 15 kW at 24V changes with load power factor, on the same DC circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load TypePF15 kW at 24V (DC)
Resistive (heaters, incandescent)1624.96 A
Fluorescent lamps0.95624.96 A
LED lighting0.9624.96 A
Synchronous motors0.9624.96 A
Typical mixed loads0.85624.96 A
Induction motors (full load)0.8624.96 A
Computers (without PFC)0.65624.96 A
Induction motors (no load)0.35624.96 A

AC Conversion Comparison

On DC, 15kW at 24V draws 624.96A. AC single-phase at PF 0.85 pulls 735.25A because reactive current is added on top of the real power.

Circuit TypeFormulaResult
DC14,999 ÷ 24624.96 A
AC Single Phase (PF 0.85)14,999 ÷ (0.85 × 24)735.25 A

Other kW Values at 24V

kWDC AmpsAC 1-Phase PF 0.85
2.5 kW104.17 A122.55 A
3 kW125 A147.06 A
3.5 kW145.83 A171.57 A
4 kW166.67 A196.08 A
5 kW208.33 A245.1 A
6 kW250 A294.12 A
7.5 kW312.5 A367.65 A
8 kW333.33 A392.16 A
10 kW416.67 A490.2 A
12 kW500 A588.24 A
15 kW625 A735.29 A
18 kW750 A882.35 A
20 kW833.33 A980.39 A
22 kW916.67 A1,078.43 A
25 kW1,041.67 A1,225.49 A

Frequently Asked Questions

15 kW at 24V draws about 624.96 amps on DC. Alternate cases at the same voltage: 735.25A on AC single-phase.
15 kW equals 14,999 watts. Multiply kilowatts by 1000.
15 kW is available in both, but three-phase is more common for commercial HVAC, rooftop units, and motors once you reach this range.
On AC single-phase, current scales inversely with power factor. At PF 1.0 (pure resistive, like a heater), 15 kW at 24V draws 624.96A. At PF 0.80 (typical induction motor), the same real power draws 781.2A. The extra current is reactive and does no real work, but still flows through the wire and the breaker.
At 24V, this is Level 1 territory (120V AC, single-phase, typically 12-16A). A 15 kW draw on a standard 120V household outlet is at or above the 1,440W NEC 210.19(A) continuous figure, which is why Level 1 EVSE ships at 1.4-1.9 kW and takes 20+ hours for a full charge. If you need 15 kW of charging, you want Level 2 on a 240V dedicated circuit, not 120V.
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.