How Many Amps Is 16.17 kW at 24V?

16.17 kilowatts at 24V works out to roughly 673.71 amps on DC at PF 0.85. That is typical for solar arrays, battery banks, and DC industrial equipment. See the DC and alternate-phase numbers below for other circuit types.

16.17 kW at 24V, DC (PF 0.85)

673.71 Amps

16.17 kilowatts at 24V on DC ≈ 673.71 amps

AC Single Phase (PF 0.85)792.6 A

Try: 15kW at 24V 18kW at 24V 20kW at 24V 12kW at 24V

Volts

Amps (DC)

673.71

Formulas

DC: kW to Amps

I_(A) = 1000 × P_(kW) ÷ V_(V)

1000 × 16.17 ÷ 24 = 16,169 ÷ 24 = 673.71 A

AC Single Phase (PF = 0.85)

I_(A) = 1000 × P_(kW) ÷ (PF × V_(V))

16,169 ÷ (0.85 × 24) = 16,169 ÷ 20.4 = 792.6 A

Equipment & Circuit Sizing

Energy Cost

16.17 kW costs $2.75/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (DC)

How the line current for 16.17 kW at 24V changes with load power factor, on the same DC circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load Type	PF	16.17 kW at 24V (DC)
Resistive (heaters, incandescent)	1	673.71 A
Fluorescent lamps	0.95	673.71 A
LED lighting	0.9	673.71 A
Synchronous motors	0.9	673.71 A
Typical mixed loads	0.85	673.71 A
Induction motors (full load)	0.8	673.71 A
Computers (without PFC)	0.65	673.71 A
Induction motors (no load)	0.35	673.71 A

AC Conversion Comparison

On DC, 16.17kW at 24V draws 673.71A. AC single-phase at PF 0.85 pulls 792.6A because reactive current is added on top of the real power.

Circuit Type	Formula	Result
DC	16,169 ÷ 24	673.71 A
AC Single Phase (PF 0.85)	16,169 ÷ (0.85 × 24)	792.6 A

Other kW Values at 24V

kW	DC Amps	AC 1-Phase PF 0.85
2.5 kW	104.17 A	122.55 A
3 kW	125 A	147.06 A
3.5 kW	145.83 A	171.57 A
4 kW	166.67 A	196.08 A
5 kW	208.33 A	245.1 A
6 kW	250 A	294.12 A
7.5 kW	312.5 A	367.65 A
8 kW	333.33 A	392.16 A
10 kW	416.67 A	490.2 A
12 kW	500 A	588.24 A
15 kW	625 A	735.29 A
18 kW	750 A	882.35 A
20 kW	833.33 A	980.39 A
22 kW	916.67 A	1,078.43 A
25 kW	1,041.67 A	1,225.49 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

Related Calculations

bolt 16,169W to amps at 24V payments 16,169W running cost cable Wire size for 673.71A at 24V

Frequently Asked Questions

How many amps is 16.17 kW at 24V?expand_more

16.17 kW at 24V draws about 673.71 amps on DC. Alternate cases at the same voltage: 792.6A on AC single-phase.

How does power factor affect the amps for 16.17 kW at 24V?expand_more

On AC single-phase, current scales inversely with power factor. At PF 1.0 (pure resistive, like a heater), 16.17 kW at 24V draws 673.71A. At PF 0.80 (typical induction motor), the same real power draws 842.14A. The extra current is reactive and does no real work, but still flows through the wire and the breaker.

What is 16.17 kW in watts?expand_more

16.17 kW equals 16,169 watts. Multiply kilowatts by 1000.

What is the formula for kW to amps?expand_more

DC: Amps = (kW × 1000) ÷ Volts. AC single-phase: Amps = (kW × 1000) ÷ (Volts × PF). AC three-phase: Amps = (kW × 1000) ÷ (Volts_L-L × √3 × PF).

Is 16.17 kW single-phase or three-phase?expand_more

16.17 kW is typically three-phase in commercial and industrial settings.

This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.