How Many Amps Is 34 kW at 460V?

34 kilowatts at 460V works out to roughly 50.2 amps on AC three-phase at PF 0.85. That is typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. See the DC and alternate-phase numbers below for other circuit types.

34 kW at 460V, AC three-phase (PF 0.85)

50.2 Amps

34 kilowatts at 460V on AC three-phase ≈ 50.2 amps

AC Single Phase (PF 0.85)86.96 A

DC (ideal baseline)73.91 A

Try: 35kW at 460V 30kW at 460V 40kW at 460V 25kW at 460V

Volts

Amps (AC three-phase, PF 0.85)

50.2

Formulas

DC: kW to Amps

I_(A) = 1000 × P_(kW) ÷ V_(V)

1000 × 34 ÷ 460 = 34,000 ÷ 460 = 73.91 A

AC Single Phase (PF = 0.85)

I_(A) = 1000 × P_(kW) ÷ (PF × V_(V))

34,000 ÷ (0.85 × 460) = 34,000 ÷ 391 = 86.96 A

AC Three Phase (PF = 0.85)

I_(A) = 1000 × P_(kW) ÷ (√3 × PF × V_L-L), where V_L-L is the line-to-line voltage

34,000 ÷ (1.732 × 0.85 × 460) = 34,000 ÷ 677.21 = 50.2 A

Equipment & Circuit Sizing

Breaker Sizing

Breaker ratings are in amps, not watts, so the real install answer depends on the equipment nameplate FLA, whether the load is continuous (NEC 210.19(A) sizes the conductor and OCP at 125% of a continuous load, equivalently 80% of breaker rating), conductor ampacity and temperature rating, ambient and bundling derates, and any motor or HVAC provisions (NEC 430 / 440). At roughly 50.2A on AC three-phase at 460V, the load sits in the bracket between a 60A standard size (non-continuous) and the next size up that covers a continuous load under 210.19(A) (around 70A). The actual install pick depends on whether the load is continuous and the factors above; a conversion page can't pick a single "right" breaker from the amp draw alone.

Energy Cost

34 kW costs $5.78/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (AC three-phase)

How the line current for 34 kW at 460V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load Type	PF	34 kW at 460V (AC three-phase)
Resistive (heaters, incandescent)	1	42.67 A
Fluorescent lamps	0.95	44.92 A
LED lighting	0.9	47.42 A
Synchronous motors	0.9	47.42 A
Typical mixed loads	0.85	50.2 A
Induction motors (full load)	0.8	53.34 A
Computers (without PFC)	0.65	65.65 A
Induction motors (no load)	0.35	121.92 A

AC Conversion Comparison

On DC, 34kW at 460V draws 73.91A. AC single-phase at PF 0.85 pulls 86.96A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 50.2A per line since the same 34kW is shared across three conductors instead of one.

Circuit Type	Formula	Result
DC	34,000 ÷ 460	73.91 A
AC Single Phase (PF 0.85)	34,000 ÷ (0.85 × 460)	86.96 A
AC Three Phase (PF 0.85)	34,000 ÷ (1.732 × 0.85 × 460)	50.2 A

Other kW Values at 460V

kW	AC 3-Phase per line, PF 0.85	AC 1-Phase PF 0.85
6 kW	8.86 A	15.35 A
7.5 kW	11.07 A	19.18 A
8 kW	11.81 A	20.46 A
10 kW	14.77 A	25.58 A
12 kW	17.72 A	30.69 A
15 kW	22.15 A	38.36 A
18 kW	26.58 A	46.04 A
20 kW	29.53 A	51.15 A
22 kW	32.49 A	56.27 A
25 kW	36.91 A	63.94 A
30 kW	44.3 A	76.73 A
35 kW	51.68 A	89.51 A
40 kW	59.06 A	102.3 A
50 kW	73.83 A	127.88 A
60 kW	88.6 A	153.45 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

electrical_services 34 kW at 208V = 111.03A (3-phase) electrical_services 34 kW at 230V = 173.91A (1-phase) electrical_services 34 kW at 240V = 166.67A (1-phase) electrical_services 34 kW at 400V = 57.74A (3-phase) electrical_services 34 kW at 480V = 48.11A (3-phase) electrical_services 34 kW at 575V = 40.16A (3-phase)

Related Calculations

bolt 34,000W to amps at 460V payments 34,000W running cost cable Wire size for 50.2A at 460V (3Φ)

Frequently Asked Questions

How many amps is 34 kW at 460V?expand_more

34 kW at 460V draws about 50.2 amps on an AC three-phase circuit at PF 0.85. Alternate cases at the same voltage: 73.91A on DC, 86.96A on AC single-phase.

How much does 34 kW cost to run?expand_more

34 kW costs $5.78 per hour at $0.17/kWh (US residential average, last reviewed April 2026). At 8 hours/day that is $1,387.20 per month.

What is the formula for kW to amps?expand_more

DC: Amps = (kW × 1000) ÷ Volts. AC single-phase: Amps = (kW × 1000) ÷ (Volts × PF). AC three-phase: Amps = (kW × 1000) ÷ (Volts_L-L × √3 × PF).

How many amps does a 34 kW EV charger draw at 460V?expand_more

460V is commercial/industrial panel voltage, not a typical AC EVSE feed to a vehicle. On three-phase 460V, 34 kW works out to about 50.2A per line (three-phase at PF 0.85). In practice, 400-480V three-phase is usually the AC input to a DC fast charger (50-350 kW CCS/NACS stations like Tesla Superchargers), which rectifies to DC and delivers that directly to the vehicle, rather than an AC EVSE connector. A 34 kW figure at 460V is most likely the AC feed to a smaller commercial cabinet or the control-side input of a larger DC fast charger, not an at-the-car AC current.

What is 34 kW in watts?expand_more

34 kW equals 34,000 watts. Multiply kilowatts by 1000.

This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.