How Many Amps Is 362 kW at 208V?

362 kilowatts at 208V works out to roughly 1,182.12 amps on AC three-phase at PF 0.85. That is typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. See the DC and alternate-phase numbers below for other circuit types.

362 kW at 208V, AC three-phase (PF 0.85)
1,182.12 Amps
362 kilowatts at 208V on AC three-phase ≈ 1,182.12 amps
AC Single Phase (PF 0.85)2,047.49 A
DC (ideal baseline)1,740.37 A
1,182.12

Formulas

DC: kW to Amps

I(A) = 1000 × P(kW) ÷ V(V)

1000 × 362 ÷ 208 = 361,997 ÷ 208 = 1,740.37 A

AC Single Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (PF × V(V))

361,997 ÷ (0.85 × 208) = 361,997 ÷ 176.8 = 2,047.49 A

AC Three Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (√3 × PF × VL-L), where VL-L is the line-to-line voltage

361,997 ÷ (1.732 × 0.85 × 208) = 361,997 ÷ 306.22 = 1,182.12 A

Equipment & Circuit Sizing

Energy Cost

362 kW costs $61.54/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (AC three-phase)

How the line current for 362 kW at 208V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load TypePF362 kW at 208V (AC three-phase)
Resistive (heaters, incandescent)11,004.8 A
Fluorescent lamps0.951,057.69 A
LED lighting0.91,116.45 A
Synchronous motors0.91,116.45 A
Typical mixed loads0.851,182.12 A
Induction motors (full load)0.81,256 A
Computers (without PFC)0.651,545.85 A
Induction motors (no load)0.352,870.87 A

AC Conversion Comparison

On DC, 362kW at 208V draws 1,740.37A. AC single-phase at PF 0.85 pulls 2,047.49A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 1,182.12A per line since the same 362kW is shared across three conductors instead of one.

Circuit TypeFormulaResult
DC361,997 ÷ 2081,740.37 A
AC Single Phase (PF 0.85)361,997 ÷ (0.85 × 208)2,047.49 A
AC Three Phase (PF 0.85)361,997 ÷ (1.732 × 0.85 × 208)1,182.12 A

Other kW Values at 208V

kWAC 3-Phase per line, PF 0.85AC 1-Phase PF 0.85
15 kW48.98 A84.84 A
18 kW58.78 A101.81 A
20 kW65.31 A113.12 A
22 kW71.84 A124.43 A
25 kW81.64 A141.4 A
30 kW97.97 A169.68 A
35 kW114.29 A197.96 A
40 kW130.62 A226.24 A
50 kW163.28 A282.81 A
60 kW195.93 A339.37 A
75 kW244.92 A424.21 A
100 kW326.56 A565.61 A
125 kW408.19 A707.01 A
150 kW489.83 A848.42 A
200 kW653.11 A1,131.22 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

Frequently Asked Questions

362 kW at 208V draws about 1,182.12 amps on an AC three-phase circuit at PF 0.85. Alternate cases at the same voltage: 1,740.37A on DC, 2,047.49A on AC single-phase.
362 kW is typically three-phase in commercial and industrial settings.
362 kW costs $61.54 per hour at $0.17/kWh (US residential average, last reviewed April 2026). At 8 hours/day that is $14,769.48 per month.
Three-phase at 208V draws 1,182.12A per line versus 2,047.49A single-phase. Less current per conductor means smaller wire and lower I²R losses.
Industrial equipment operates at higher power levels. 362 kW is easier to express than 361,997W. The math is identical, just scaled by 1000.
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.