How Many Amps Is 424.01 kW at 460V?

424.01 kilowatts at 460V works out to roughly 626.09 amps on AC three-phase at PF 0.85. That is typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. See the DC and alternate-phase numbers below for other circuit types.

424.01 kW at 460V, AC three-phase (PF 0.85)
626.09 Amps
424.01 kilowatts at 460V on AC three-phase ≈ 626.09 amps
AC Single Phase (PF 0.85)1,084.41 A
DC (ideal baseline)921.75 A
626.09

Formulas

DC: kW to Amps

I(A) = 1000 × P(kW) ÷ V(V)

1000 × 424.01 ÷ 460 = 424,006 ÷ 460 = 921.75 A

AC Single Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (PF × V(V))

424,006 ÷ (0.85 × 460) = 424,006 ÷ 391 = 1,084.41 A

AC Three Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (√3 × PF × VL-L), where VL-L is the line-to-line voltage

424,006 ÷ (1.732 × 0.85 × 460) = 424,006 ÷ 677.21 = 626.09 A

Equipment & Circuit Sizing

Energy Cost

424.01 kW costs $72.08/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (AC three-phase)

How the line current for 424.01 kW at 460V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load TypePF424.01 kW at 460V (AC three-phase)
Resistive (heaters, incandescent)1532.17 A
Fluorescent lamps0.95560.18 A
LED lighting0.9591.3 A
Synchronous motors0.9591.3 A
Typical mixed loads0.85626.09 A
Induction motors (full load)0.8665.22 A
Computers (without PFC)0.65818.73 A
Induction motors (no load)0.351,520.5 A

AC Conversion Comparison

On DC, 424.01kW at 460V draws 921.75A. AC single-phase at PF 0.85 pulls 1,084.41A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 626.09A per line since the same 424.01kW is shared across three conductors instead of one.

Circuit TypeFormulaResult
DC424,006 ÷ 460921.75 A
AC Single Phase (PF 0.85)424,006 ÷ (0.85 × 460)1,084.41 A
AC Three Phase (PF 0.85)424,006 ÷ (1.732 × 0.85 × 460)626.09 A

Other kW Values at 460V

kWAC 3-Phase per line, PF 0.85AC 1-Phase PF 0.85
15 kW22.15 A38.36 A
18 kW26.58 A46.04 A
20 kW29.53 A51.15 A
22 kW32.49 A56.27 A
25 kW36.91 A63.94 A
30 kW44.3 A76.73 A
35 kW51.68 A89.51 A
40 kW59.06 A102.3 A
50 kW73.83 A127.88 A
60 kW88.6 A153.45 A
75 kW110.74 A191.82 A
100 kW147.66 A255.75 A
125 kW184.57 A319.69 A
150 kW221.49 A383.63 A
200 kW295.32 A511.51 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

Frequently Asked Questions

424.01 kW at 460V draws about 626.09 amps on an AC three-phase circuit at PF 0.85. Alternate cases at the same voltage: 921.75A on DC, 1,084.41A on AC single-phase.
Industrial equipment operates at higher power levels. 424.01 kW is easier to express than 424,006W. The math is identical, just scaled by 1000.
460V is commercial/industrial panel voltage, not a typical AC EVSE feed to a vehicle. On three-phase 460V, 424.01 kW works out to about 626.09A per line (three-phase at PF 0.85). In practice, 400-480V three-phase is usually the AC input to a DC fast charger (50-350 kW CCS/NACS stations like Tesla Superchargers), which rectifies to DC and delivers that directly to the vehicle, rather than an AC EVSE connector. A 424.01 kW figure at 460V is most likely the AC feed to a smaller commercial cabinet or the control-side input of a larger DC fast charger, not an at-the-car AC current.
424.01 kW costs $72.08 per hour at $0.17/kWh (US residential average, last reviewed April 2026). At 8 hours/day that is $17,299.44 per month.
424.01 kW equals 424,006 watts. Multiply kilowatts by 1000.
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.