How Many Amps Is 476.08 kW at 480V?

476.08 kilowatts at 480V works out to roughly 673.68 amps on AC three-phase at PF 0.85. That is typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. See the DC and alternate-phase numbers below for other circuit types.

476.08 kW at 480V, AC three-phase (PF 0.85)

673.68 Amps

476.08 kilowatts at 480V on AC three-phase ≈ 673.68 amps

AC Single Phase (PF 0.85)1,166.85 A

DC (ideal baseline)991.83 A

Try: 200kW at 480V 150kW at 480V 125kW at 480V 100kW at 480V

Volts

Amps (AC three-phase, PF 0.85)

673.68

Formulas

DC: kW to Amps

I_(A) = 1000 × P_(kW) ÷ V_(V)

1000 × 476.08 ÷ 480 = 476,076 ÷ 480 = 991.83 A

AC Single Phase (PF = 0.85)

I_(A) = 1000 × P_(kW) ÷ (PF × V_(V))

476,076 ÷ (0.85 × 480) = 476,076 ÷ 408 = 1,166.85 A

AC Three Phase (PF = 0.85)

I_(A) = 1000 × P_(kW) ÷ (√3 × PF × V_L-L), where V_L-L is the line-to-line voltage

476,076 ÷ (1.732 × 0.85 × 480) = 476,076 ÷ 706.66 = 673.68 A

Equipment & Circuit Sizing

Energy Cost

476.08 kW costs $80.93/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (AC three-phase)

How the line current for 476.08 kW at 480V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load Type	PF	476.08 kW at 480V (AC three-phase)
Resistive (heaters, incandescent)	1	572.63 A
Fluorescent lamps	0.95	602.77 A
LED lighting	0.9	636.26 A
Synchronous motors	0.9	636.26 A
Typical mixed loads	0.85	673.68 A
Induction motors (full load)	0.8	715.79 A
Computers (without PFC)	0.65	880.97 A
Induction motors (no load)	0.35	1,636.09 A

AC Conversion Comparison

On DC, 476.08kW at 480V draws 991.83A. AC single-phase at PF 0.85 pulls 1,166.85A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 673.68A per line since the same 476.08kW is shared across three conductors instead of one.

Circuit Type	Formula	Result
DC	476,076 ÷ 480	991.83 A
AC Single Phase (PF 0.85)	476,076 ÷ (0.85 × 480)	1,166.85 A
AC Three Phase (PF 0.85)	476,076 ÷ (1.732 × 0.85 × 480)	673.68 A

Other kW Values at 480V

kW	AC 3-Phase per line, PF 0.85	AC 1-Phase PF 0.85
15 kW	21.23 A	36.76 A
18 kW	25.47 A	44.12 A
20 kW	28.3 A	49.02 A
22 kW	31.13 A	53.92 A
25 kW	35.38 A	61.27 A
30 kW	42.45 A	73.53 A
35 kW	49.53 A	85.78 A
40 kW	56.6 A	98.04 A
50 kW	70.75 A	122.55 A
60 kW	84.9 A	147.06 A
75 kW	106.13 A	183.82 A
100 kW	141.51 A	245.1 A
125 kW	176.88 A	306.37 A
150 kW	212.26 A	367.65 A
200 kW	283.01 A	490.2 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

electrical_services 476.08 kW at 208V = 1,554.65A (3-phase) electrical_services 476.08 kW at 400V = 808.42A (3-phase) electrical_services 476.08 kW at 460V = 702.97A (3-phase) electrical_services 476.08 kW at 575V = 562.38A (3-phase)

Related Calculations

bolt 476,076W to amps at 480V payments 476,076W running cost cable Wire size for 673.68A at 480V (3Φ)

Frequently Asked Questions

How many amps is 476.08 kW at 480V?expand_more

476.08 kW at 480V draws about 673.68 amps on an AC three-phase circuit at PF 0.85. Alternate cases at the same voltage: 991.83A on DC, 1,166.85A on AC single-phase.

What is 476.08 kW in watts?expand_more

476.08 kW equals 476,076 watts. Multiply kilowatts by 1000.

How much does 476.08 kW cost to run?expand_more

476.08 kW costs $80.93 per hour at $0.17/kWh (US residential average, last reviewed April 2026). At 8 hours/day that is $19,423.90 per month.

What size breaker would I need for 476.08 kW at 480V?expand_more

This is a sizing question, not a conversion question, and there is no single correct answer from a page like this. Breaker selection depends on the equipment nameplate FLA, whether the load is continuous (NEC 210.19(A) applies the 125% continuous-load rule), the conductor ampacity and temperature rating, any NEC 430/440 motor or HVAC provisions, and local code interpretation. Use the nameplate and a licensed electrician for the real install value; use this page only for the current-draw estimate that feeds into that process.

Is 476.08 kW single-phase or three-phase?expand_more

476.08 kW is typically three-phase in commercial and industrial settings.

This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.