How Many Amps Is 477.25 kW at 480V?

477.25 kilowatts at 480V works out to roughly 675.35 amps on AC three-phase at PF 0.85. That is typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. See the DC and alternate-phase numbers below for other circuit types.

477.25 kW at 480V, AC three-phase (PF 0.85)
675.35 Amps
477.25 kilowatts at 480V on AC three-phase ≈ 675.35 amps
AC Single Phase (PF 0.85)1,169.74 A
DC (ideal baseline)994.28 A
675.35

Formulas

DC: kW to Amps

I(A) = 1000 × P(kW) ÷ V(V)

1000 × 477.25 ÷ 480 = 477,254 ÷ 480 = 994.28 A

AC Single Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (PF × V(V))

477,254 ÷ (0.85 × 480) = 477,254 ÷ 408 = 1,169.74 A

AC Three Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (√3 × PF × VL-L), where VL-L is the line-to-line voltage

477,254 ÷ (1.732 × 0.85 × 480) = 477,254 ÷ 706.66 = 675.35 A

Equipment & Circuit Sizing

Energy Cost

477.25 kW costs $81.13/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (AC three-phase)

How the line current for 477.25 kW at 480V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load TypePF477.25 kW at 480V (AC three-phase)
Resistive (heaters, incandescent)1574.05 A
Fluorescent lamps0.95604.26 A
LED lighting0.9637.83 A
Synchronous motors0.9637.83 A
Typical mixed loads0.85675.35 A
Induction motors (full load)0.8717.56 A
Computers (without PFC)0.65883.15 A
Induction motors (no load)0.351,640.14 A

AC Conversion Comparison

On DC, 477.25kW at 480V draws 994.28A. AC single-phase at PF 0.85 pulls 1,169.74A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 675.35A per line since the same 477.25kW is shared across three conductors instead of one.

Circuit TypeFormulaResult
DC477,254 ÷ 480994.28 A
AC Single Phase (PF 0.85)477,254 ÷ (0.85 × 480)1,169.74 A
AC Three Phase (PF 0.85)477,254 ÷ (1.732 × 0.85 × 480)675.35 A

Other kW Values at 480V

kWAC 3-Phase per line, PF 0.85AC 1-Phase PF 0.85
15 kW21.23 A36.76 A
18 kW25.47 A44.12 A
20 kW28.3 A49.02 A
22 kW31.13 A53.92 A
25 kW35.38 A61.27 A
30 kW42.45 A73.53 A
35 kW49.53 A85.78 A
40 kW56.6 A98.04 A
50 kW70.75 A122.55 A
60 kW84.9 A147.06 A
75 kW106.13 A183.82 A
100 kW141.51 A245.1 A
125 kW176.88 A306.37 A
150 kW212.26 A367.65 A
200 kW283.01 A490.2 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

Frequently Asked Questions

477.25 kW at 480V draws about 675.35 amps on an AC three-phase circuit at PF 0.85. Alternate cases at the same voltage: 994.28A on DC, 1,169.74A on AC single-phase.
477.25 kW equals 477,254 watts. Multiply kilowatts by 1000.
Three-phase at 480V draws 675.35A per line versus 1,169.74A single-phase. Less current per conductor means smaller wire and lower I²R losses.
477.25 kW costs $81.13 per hour at $0.17/kWh (US residential average, last reviewed April 2026). At 8 hours/day that is $19,471.96 per month.
477.25 kW is typically three-phase in commercial and industrial settings.
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.