How Many Amps Is 668.43 kW at 480V?
668.43 kW at 480V draws about 945.88 amps on an AC three-phase circuit at PF 0.85, typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. Actual current varies with equipment power factor and duty cycle.
Use this citation when referencing this page.
Formulas
DC: kW to Amps
I(A) = 1000 × P(kW) ÷ V(V)
AC Single Phase (PF = 0.85)
I(A) = 1000 × P(kW) ÷ (PF × V(V))
AC Three Phase (PF = 0.85)
I(A) = 1000 × P(kW) ÷ (√3 × PF × VL-L), where VL-L is the line-to-line voltage
Equipment & Circuit Sizing
Energy Cost
668.43 kW costs $113.63/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.
Power Factor Reference (AC three-phase)
How the line current for 668.43 kW at 480V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.
| Load Type | PF | 668.43 kW at 480V (AC three-phase) |
|---|---|---|
| Resistive (heaters, incandescent) | 1 | 803.99 A |
| Fluorescent lamps | 0.95 | 846.31 A |
| LED lighting | 0.9 | 893.33 A |
| Synchronous motors | 0.9 | 893.33 A |
| Typical mixed loads | 0.85 | 945.88 A |
| Induction motors (full load) | 0.8 | 1,004.99 A |
| Computers (without PFC) | 0.65 | 1,236.91 A |
| Induction motors (no load) | 0.35 | 2,297.13 A |
AC Conversion Comparison
On DC, 668.43kW at 480V draws 1,392.56A. AC single-phase at PF 0.85 pulls 1,638.3A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 945.88A per line since the same 668.43kW is shared across three conductors instead of one.
| Circuit Type | Formula | Result |
|---|---|---|
| DC | 668,428 ÷ 480 | 1,392.56 A |
| AC Single Phase (PF 0.85) | 668,428 ÷ (0.85 × 480) | 1,638.3 A |
| AC Three Phase (PF 0.85) | 668,428 ÷ (1.732 × 0.85 × 480) | 945.88 A |
Other kW Values at 480V
| kW | AC 3-Phase per line, PF 0.85 | AC 1-Phase PF 0.85 |
|---|---|---|
| 15 kW | 21.23 A | 36.76 A |
| 18 kW | 25.47 A | 44.12 A |
| 20 kW | 28.3 A | 49.02 A |
| 22 kW | 31.13 A | 53.92 A |
| 25 kW | 35.38 A | 61.27 A |
| 30 kW | 42.45 A | 73.53 A |
| 35 kW | 49.53 A | 85.78 A |
| 40 kW | 56.6 A | 98.04 A |
| 50 kW | 70.75 A | 122.55 A |
| 60 kW | 84.9 A | 147.06 A |
| 75 kW | 106.13 A | 183.82 A |
| 100 kW | 141.51 A | 245.1 A |
| 125 kW | 176.88 A | 306.37 A |
| 150 kW | 212.26 A | 367.65 A |
| 200 kW | 283.01 A | 490.2 A |
Same kW, Other Voltages
Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.