How Many Amps Is 792 kW at 480V?

792 kW at 480V draws about 1,120.74 amps on an AC three-phase circuit at PF 0.85, typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. Actual current varies with equipment power factor and duty cycle.

792 kW at 480V, AC three-phase (PF 0.85)

1,120.74 Amps

792 kilowatts at 480V on AC three-phase ≈ 1,120.74 amps

AC Single Phase (PF 0.85)1,941.18 A

DC (ideal baseline)1,650 A

Try: 200kW at 480V 150kW at 480V 125kW at 480V 100kW at 480V

Volts

Amps (AC three-phase, PF 0.85)

1,120.74

Formulas

DC: kW to Amps

I_(A) = 1000 × P_(kW) ÷ V_(V)

1000 × 792 ÷ 480 = 792,000 ÷ 480 = 1,650 A

AC Single Phase (PF = 0.85)

I_(A) = 1000 × P_(kW) ÷ (PF × V_(V))

792,000 ÷ (0.85 × 480) = 792,000 ÷ 408 = 1,941.18 A

AC Three Phase (PF = 0.85)

I_(A) = 1000 × P_(kW) ÷ (√3 × PF × V_L-L), where V_L-L is the line-to-line voltage

792,000 ÷ (1.732 × 0.85 × 480) = 792,000 ÷ 706.66 = 1,120.74 A

Equipment & Circuit Sizing

Energy Cost

792 kW costs $134.64/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (AC three-phase)

How the line current for 792 kW at 480V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load Type	PF	792 kW at 480V (AC three-phase)
Resistive (heaters, incandescent)	1	952.63 A
Fluorescent lamps	0.95	1,002.77 A
LED lighting	0.9	1,058.48 A
Synchronous motors	0.9	1,058.48 A
Typical mixed loads	0.85	1,120.74 A
Induction motors (full load)	0.8	1,190.78 A
Computers (without PFC)	0.65	1,465.58 A
Induction motors (no load)	0.35	2,721.79 A

AC Conversion Comparison

On DC, 792kW at 480V draws 1,650A. AC single-phase at PF 0.85 pulls 1,941.18A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 1,120.74A per line since the same 792kW is shared across three conductors instead of one.

Circuit Type	Formula	Result
DC	792,000 ÷ 480	1,650 A
AC Single Phase (PF 0.85)	792,000 ÷ (0.85 × 480)	1,941.18 A
AC Three Phase (PF 0.85)	792,000 ÷ (1.732 × 0.85 × 480)	1,120.74 A

Other kW Values at 480V

kW	AC 3-Phase per line, PF 0.85	AC 1-Phase PF 0.85
15 kW	21.23 A	36.76 A
18 kW	25.47 A	44.12 A
20 kW	28.3 A	49.02 A
22 kW	31.13 A	53.92 A
25 kW	35.38 A	61.27 A
30 kW	42.45 A	73.53 A
35 kW	49.53 A	85.78 A
40 kW	56.6 A	98.04 A
50 kW	70.75 A	122.55 A
60 kW	84.9 A	147.06 A
75 kW	106.13 A	183.82 A
100 kW	141.51 A	245.1 A
125 kW	176.88 A	306.37 A
150 kW	212.26 A	367.65 A
200 kW	283.01 A	490.2 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

electrical_services 792 kW at 400V = 1,344.89A (3-phase) electrical_services 792 kW at 460V = 1,169.47A (3-phase) electrical_services 792 kW at 575V = 935.57A (3-phase)

Related Calculations

bolt 792,000W to amps at 480V payments 792,000W running cost cable Wire size for 1,120.74A at 480V (3Φ)

Frequently Asked Questions

How many amps is 792 kW at 480V?expand_more

792 kW at 480V draws about 1,120.74 amps on an AC three-phase circuit at PF 0.85. Alternate cases at the same voltage: 1,650A on DC, 1,941.18A on AC single-phase.

Why do industrial systems use kW instead of watts?expand_more

Industrial equipment operates at higher power levels. 792 kW is easier to express than 792,000W. The math is identical, just scaled by 1000.

How much does 792 kW cost to run?expand_more

792 kW costs $134.64 per hour at $0.17/kWh (US residential average, last reviewed April 2026). At 8 hours/day that is $32,313.60 per month.

Is 792 kW single-phase or three-phase?expand_more

792 kW is typically three-phase in commercial and industrial settings.

How many amps does a 792 kW EV charger draw at 480V?expand_more

480V is commercial/industrial panel voltage, not a typical AC EVSE feed to a vehicle. On three-phase 480V, 792 kW works out to about 1,120.74A per line (three-phase at PF 0.85). In practice, 400-480V three-phase is usually the AC input to a DC fast charger (50-350 kW CCS/NACS stations like Tesla Superchargers), which rectifies to DC and delivers that directly to the vehicle, rather than an AC EVSE connector. A 792 kW figure at 480V is most likely the AC feed to a smaller commercial cabinet or the control-side input of a larger DC fast charger, not an at-the-car AC current.

This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.