How Many Amps Is 370.4 kW at 400V?

370.4 kW at 400V draws about 628.97 amps on an AC three-phase circuit at PF 0.85, typical for commercial HVAC, industrial motors, rooftop units, and three-phase panel loads. Actual current varies with equipment power factor and duty cycle.

370.4 kW at 400V, AC three-phase (PF 0.85)
628.97 Amps
370.4 kilowatts at 400V on AC three-phase ≈ 628.97 amps
AC Single Phase (PF 0.85)1,089.41 A
DC (ideal baseline)926 A
628.97

Formulas

DC: kW to Amps

I(A) = 1000 × P(kW) ÷ V(V)

1000 × 370.4 ÷ 400 = 370,400 ÷ 400 = 926 A

AC Single Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (PF × V(V))

370,400 ÷ (0.85 × 400) = 370,400 ÷ 340 = 1,089.41 A

AC Three Phase (PF = 0.85)

I(A) = 1000 × P(kW) ÷ (√3 × PF × VL-L), where VL-L is the line-to-line voltage

370,400 ÷ (1.732 × 0.85 × 400) = 370,400 ÷ 588.88 = 628.97 A

Equipment & Circuit Sizing

Energy Cost

370.4 kW costs $62.97/hour at $0.17/kWh (rates last reviewed April 2026). See breakdown.

Power Factor Reference (AC three-phase)

How the line current for 370.4 kW at 400V changes with load power factor, on the same AC three-phase circuit basis the rest of the page uses. DC has no power factor; PF 1.0 represents resistive AC loads.

Load TypePF370.4 kW at 400V (AC three-phase)
Resistive (heaters, incandescent)1534.63 A
Fluorescent lamps0.95562.76 A
LED lighting0.9594.03 A
Synchronous motors0.9594.03 A
Typical mixed loads0.85628.97 A
Induction motors (full load)0.8668.28 A
Computers (without PFC)0.65822.5 A
Induction motors (no load)0.351,527.5 A

AC Conversion Comparison

On DC, 370.4kW at 400V draws 926A. AC single-phase at PF 0.85 pulls 1,089.41A because reactive current is added on top of the real power. Three-phase at the same voltage needs only 628.97A per line since the same 370.4kW is shared across three conductors instead of one.

Circuit TypeFormulaResult
DC370,400 ÷ 400926 A
AC Single Phase (PF 0.85)370,400 ÷ (0.85 × 400)1,089.41 A
AC Three Phase (PF 0.85)370,400 ÷ (1.732 × 0.85 × 400)628.97 A

Other kW Values at 400V

kWAC 3-Phase per line, PF 0.85AC 1-Phase PF 0.85
15 kW25.47 A44.12 A
18 kW30.57 A52.94 A
20 kW33.96 A58.82 A
22 kW37.36 A64.71 A
25 kW42.45 A73.53 A
30 kW50.94 A88.24 A
35 kW59.43 A102.94 A
40 kW67.92 A117.65 A
50 kW84.9 A147.06 A
60 kW101.89 A176.47 A
75 kW127.36 A220.59 A
100 kW169.81 A294.12 A
125 kW212.26 A367.65 A
150 kW254.71 A441.18 A
200 kW339.62 A588.24 A

Same kW, Other Voltages

Each destination page leads with the interpretation most common for that voltage, so the amps shown below use the same basis as the page you'd land on: single-phase for residential voltages, three-phase for commercial/industrial panel voltages, DC for low-voltage.

Frequently Asked Questions

370.4 kW at 400V draws about 628.97 amps on an AC three-phase circuit at PF 0.85. Alternate cases at the same voltage: 926A on DC, 1,089.41A on AC single-phase.
Three-phase at 400V draws 628.97A per line versus 1,089.41A single-phase. Less current per conductor means smaller wire and lower I²R losses.
370.4 kW costs $62.97 per hour at $0.17/kWh (US residential average, last reviewed April 2026). At 8 hours/day that is $15,112.32 per month.
DC: Amps = (kW × 1000) ÷ Volts. AC single-phase: Amps = (kW × 1000) ÷ (Volts × PF). AC three-phase: Amps = (kW × 1000) ÷ (VoltsL-L × √3 × PF).
370.4 kW is typically three-phase in commercial and industrial settings.
This calculator provides estimates for reference purposes only. Always consult a licensed electrician and verify compliance with the National Electrical Code (NEC) and local electrical codes before performing any electrical work.